background image

GB -12-

Precautions and general recommendations

1. Packing

The packaging materials are 100% recyclable and marked with the recycling symbol 

.

2. Removing the packaging and inspecting the contents

After unpacking, make sure that the dishwasher is undamaged and that the door 

closes correctly. If in doubt, contact a qualified technician or your local retailer.
3. Before using the dishwasher for the first time
- The appliance is designed to operate at ambient temperatures of between 5°C and 45°C.

- This dishwasher has been tested by the manufacturer to ensure it functions correctly. 

Such testing may leave slight drips/water marks which will disappear with the first wash.

4. Energy and water savings

- Do not rinse crockery under running water.

- Always fully load the dishwasher before running it or select the “Half load/

Multizone” option (if available).

- If ecological energy sources are available such as solar panel heating, heat pumps or 

centralised heating systems, the appliance may be connected to the hot water 

mains up to a maximum temperature of 60°C. Make sure the water inlet hose is of 

the correct type (“70°C Max” or “90°C Max”).

5. Child safety

- Keep the packaging materials out of the reach of children.

- Children must not be allowed to play with the dishwasher.

- Store the detergent, rinse aid and salt out of the reach of children.
6. Safety warnings

- The appliance is not intended for use by children or physically or mentally impaired 

persons, unless adequately supervised by a responsible adult capable of 

guaranteeing safe use of the appliance.

- Do not operate the appliance in the open air.

- Do not store flammable materials in close proximity to the dishwasher.

- The water in the dishwasher is not potable.

- Do not use solvents inside the dishwasher: risk of explosion!

- Be careful when the door is open: risk of tripping!

- The open dishwasher door can only support the weight of the loaded rack when 

pulled out. Do not rest objects on the open door or sit or stand on it.

- Sharp items that might cause injury (e.g. knives), must be placed in the cutlery 

basket with the sharp end facing downwards. Long-handled utensils must be 

arranged horizontally in the upper rack, with the sharp end facing away from the 

front of the appliance.

- Before cleaning or carrying out maintenance, disconnect the mains plug and turn 

off the water tap; also in the event of any malfunction.

- Repairs and technical modifications must be carried out exclusively by a qualified technician.
7. Resistance to frost

If the appliance is placed in surroundings exposed to the risk of frost, it must be 

drained completely. Turn off the water tap, remove the inlet and outlet hoses, and let 

all the water drain away. Make sure there is at least 1 kg of dissolved regeneration salt 

in the salt container, to protect the appliance from temperatures of up to -20°C. 

When the program resumes, an error message may be indicated (see page 9).

“F6 E2” - the appliance must remain at an ambient temperature of min. 5°C for at 

least 24 hours.

After eliminating these faults, RESET the appliance (see chapter “What to do if...”).
8. Disposal

- The appliance is manufactured using recyclable materials. If you decide to scrap the 

dishwasher, it must be disposed of in compliance with local waste disposal 

regulations. Make it unusable by cutting off the power cord. To prevent situations 

of potential danger to children (e.g. danger of suffocation), break the lock of the 

door so that it can no longer be closed.

- This appliance is marked according to the European directive 2002/96/CE on Waste 

Electrical and Electronic Equipment (WEEE). By ensuring that this appliance is 

scrapped suitably, you can help prevent potentially damaging consequences for the 

environment and health. Unsuitable disposal of an appliance of this type as household 

waste could have detrimental effects on the environment. The symbol   on the 

appliance, or on documentation enclosed with the appliance, indicates that this 

product must not be treated as household waste, but must be delivered to the 

nearest collection centre for the recycling of electrical and electronic appliances. 

Disposal must be carried out in accordance with local environmental regulations for 

waste disposal. For further information on the treatment, recovery and recycling of 

this appliance, contact your competent local authority, the collection service for 

household waste or the shop where you purchased the appliance.

EC Declaration of conformity

This appliance has been designed, constructed and distributed in compliance with the 

safety requirements of EC Directives: 

 2006/95/CE, 89/336/CE, 93/68/CE and 

2002/95/CE (RoHS Directive).
Loading Capacity: 13 place settings.

The guarantee is not applicable if faults are caused by incorrect use of the appliance.

We reserve the right to make technical modifications.

Summary of Contents for ADP 8693













Reviews: