12
MODE AND FUNCTION DESCRIPTIONS
6th SENSE MODE
Press the
button, the unit enters
6th sense
mode directly regardless of the unit is on or off.
In this mode, temperature and fan speed are
automatically set based on the actual room
temperature.
Operation mode and temperature are
determined by indoor temperature.
Heat pump models
Cooling only models
Button is ineffective in Jet mode.
Note:
Temperature, airflow and direction are
controlled automatically in 6th sense mode.
However, a decrease or rise of up to 2°C can be
set with the remote control if you still feel
uncomfortable.
What you can do in 6th sense mode
Indoor
temperature
Operation
mode
Target
temperature
21°C or below
HEATING
22°C
21°C-23°C
FAN ONLY
23°C-26°C
DRY
Room
temperature
decrease 1.5°C
after operating
for 3 minutes
Over 26°C
COOLING
26°C
Indoor
temperature
Operation
mode
Target
temperature
26°C or below
DRY
Room
temperature
decrease 1.5°C
after operating
for 3 minutes
Over 26°C
COOLING
26°C
ON
OFF
Your feeling
button
adjustment procedure
Uncomfortable because of unsuitable
air flow volume.
FAN
Indoor fan speed alternates among High, Medium
and Low each time this button is pressed.
Uncomfortable because of unsuitable
flow direction.
Swing
Press it once, the vertical adjustment louver swings
to change vertical airflow direction. Press it again,
swings stops. For horizontal airflow direction please
refer to the chapter "Airflow direction control".
