5019 301 20103
GB
Quick Reference Guide
Please read the Instructions Manual carefully before using your new washing machine
(We reserve the right to make technical modifications)
Whirlpool is a registered trademark of Whirlpool USA
Programme selector
To select a programme, turn the knob.
The corresponding symbol will appear on the display.
To change the programme once the wash cycle has
started, turn the knob to “
” and set the new
programme.
When the knob is on “
” three dashes blink on the
display.
Start button
When you press this button, it lights up and the wash
cycle starts. At the end of the wash cycle the light will
turn off and END will appear on the display.
On/Off button
This button switches the washing machine on/off.
Changing or interrupting the programme during the wash cycle
Turn the programme selector to the
“
”
position.
Select the new programme (with temperature), any options and
another spin speed if you want.
Press the “Start” button again. If the “On/Off” button is pressed, no
detergent has to added.
Cancelling a programme before the end
Turn the programme selector to the
“
”
position.
Set the programme selector to programme setting “Drain/Spin.
Press the “Start” button to start the “Drain/Spin” cycle.
Display
Shows the wash cycle sequence.
Options
Selecting any option the indication lights up .
When the combination of programme, additional options and
temperature is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are deselected
automatically.
Start Delay
Delays the start of the wash cycle by 1 to 16 hours.
Each time the button is pressed, the start of the wash
cycle is delayed by 1 hour.
Prewash
Only for heavily soiled laundry (e.g. sand, granular
dirt). Programmes with Prewash last approx. 15
minutes longer.
Intensive rinse button
More water and a longer time in rinse cycle is added.
The intensive rinse function is especially suitable for
areas with particularly soft water, for baby clothes
and to help people with allergies.
Easy Ironing
Can be used together with Cotton and Synthetic
programmes to make ironing easier.
Spin
Every programme has an automatic predefined
maximum spin speed.
Press the button to select a different spin speed.
If the spin speed “0” is selected, the final spin is
cancelled. The water is drained out only.
Quick wash
For quick, economical washes. Especially suitable for
small, lightly soiled loads. This option can be used
with Cotton and Synthetic programmes. Selecting this
function allows you to shorten the wash cycle time
depending on the temperature.
Note: reduce the detergent quantity.
Power and water consumption data
Programme
Temperature
selector
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Programme Duration
approx.
(hours : minutes)*
Prewash cycle increases programme duration
by approx. 15 minutes. Consumption values
were measured in normalized conditions in
compliance with Standard IEC 60 456.
Consumption data in the home may vary with
respect to the values in the table in relation to
the water supply pressure and temperature,
the load and the type of wash.
*
The remaining time display may differ from
the values given in the table since it
depends on the conditions of use in the
home.
** To reduce the water temperature, some
cold water is added at the end of the main
wash cycle, before the pump drains the
water out.
Cotton
90
3.5
49**
1.20
1:56
Cotton
60
3.5
44
0.67
2:13
Cotton
40
3.5
44
0.38
2:00
Synthetics
60
2.0
42
0.80
1:44
Synthetics
40
2.0
42
0.43
1:34
Synthetics short
30
2.0
30
0.30
0:40
Delicate
30
1.5
47
0.45
0:53
Wool
40
1.0
58
0.45
0:48
Handwash
30
1.0
55
0.25
0:51
3GB20103.fm Page 4 Wednesday, March 10, 2004 7:04 PM
Black process 45.0° 150.0 LPI
