S E R V I C E
23.05.2002 / Page 2
DWF 405 S
Whirlpool Europe
Doc. No: 4812 718 18048
8545 405 01770
Customer Service
Technical data
Dimension of Built In appliances Full Door and
Integretable types
Height
82.0 - 87.0 cm
Width
59.7
cm
Depth
55.5
cm
Weight
53
kg
Wooden door for Integrable types
Thickness min.
16
mm
Thickness max.
20
mm
Width min.
592
mm
Width max.
595
mm
Height min.
515
mm
Height max.
600
mm
Weight max.
5.5
kg
Max. stick out over lower
edge of appliance door
92
mm
Height of plinth min.
93
mm
Electronic boards
Service boards
see spare part list
Serial boards
see on the boards itself
UB
4619 724 21071
Programing of version and programmed control
board, see „Service“ and „Data set“ on rating
plate of inner door:
CB programmed
468591
Data set
468581
Basic control board, not programmed see on the
board itself
4619 724 17401
Succession of programs
Programs
see program diagram
Succession
P1a - P3a - P5b - P7a
Datas Energy Label
Reference program
P5b
Energy Performance
C
Cleaning Performance
B
Drying Performance
D
Program information
Start indicator
All programs will be locked after start. Changing
the program or finishing the program will be
possible only after pressing the start button for
longer then 1.5 sec. (Break by customer)
A switching off the appliance or unplug the
appliance for a while, this will frozen the program
step and later on, the program continuos on the
same position.
Exception: Switching off the appliance or unplug
the appliance during the drying phase, this will lead
directly to the end of the program.
Water Volume at permanent spray system
Water
Volume
Level
Regeneration
0.3 l
15 mm
Back rinse 3x
1.0 l
60 mm
Prewash
4.8 l
120 mm
Main wash
4.2 l
118 mm
Intermediate rinse 1
4.2 l
118 mm
Intermediate rinse 2
4.2 l
118 mm
Clear rinse
4.2 l
118 mm
Safety/ overflow
8.5 l
141 mm
Measuring the level
Remove the coarse sieve, put in a measuring
meter into the sump, measure the hight of the
water level.
Detergent max.
Pre-wash
10
cm
3
Main-wash
40
cm
3
Rinse aid
135
cm
3
6 Dosage steps
1 - 6
ml
Water softener
Saltcontainer
2
kg
Resin container
900
cm
3
Regeneration dosage
300
cm
3
Water pressure
Inlet pressure
0.3 - 10
bar
Spray pump pressure
0.3
bar
