EN
3
4.
SWITCH ON THE WASHING MACHINE
• Press the “
On/Off”
button until the programme button lights
up. An animation appears, and there is a sound. Afterwards
the washing machine is ready to be operated.
5.
SET THE DESIRED PROGRAMME
GUIDED MODE
- the button light guides you through setting your
programme in the following order: selection of programme /
temperature / spin speed / options. As soon as you confirm a selection
by pressing the knob, the button light will jump to the next step.
•
Select programme:
Make sure that the programme button lights up. Turn the knob
to select the desired Programme.
Programme name and duration appear on the display.
Confirm the desired programme by pressing the knob. The
maximum possible laundry load for the selected programme is
indicated after a few seconds.
•
Change temperature, if needed
If you want to change the temperature indicated over the
temperature button, make sure that the Temperature button
lights up.
Turn the knob to select the desired temperature, then press the
knob to confirm.
•
Change spin speed, if needed
If you want to change the spin speed indicated over the Spin
button, make sure that the Spin button lights up.
Turn the knob to select the desired spin speed, or Rinse hold,
then press the knob to confirm.
•
Select options, if needed
Make sure that the options button lights up. The options which
are selectable for your programme are indicated by lighting
arrows.
Turn the knob to select the desired options. The symbol of the selected
option blinks. To confirm it, press the knob.
Some options / functions can be selected by directly pressing the
button:
Refer to section OPTIONS, FUNCTIONS AND INDICATORS for more
information.
INDIVIDUAL MODE
After you have switched on the washing machine, you are not forced to
follow the GUIDED MODE.
It is up to you which order you choose to set your programme. To do a
setting, first press the relevant button, then turn the knob to select,
and finally press the knob to confirm.
The range of temperatures, spin speeds and options depend on the
programme selected. Therefore it is recommended to start your
setting with selecting the programme.
6.
ADD DETERGENT
• If you do not use the Dosing Aid function, pull out the
detergent dispenser and add detergent (and additives/
softener) now, as indicated in section DETERGENT
DISPENSER.
Observe the dosing recommendations on the detergent
pack. If you have selected PREWASH or FINISH IN, observe the
recommendations in section OPTIONS, FUNCTIONS AND
INDICATORS. Afterwards carefully close the detergent dispenser.
• If you use
the “Dosing Aid” function, add detergent later
, after
you have started the programme. Refer to section OPTIONS,
FUNCTIONS AND INDICATORS.
• After having added detergent /additives, do not open the detergent
dispenser anymore, to avoid overflow.
7.
START PROGRAMME
• Press and hold “Start/Pause” until the button lights up
solidly; the programme starts.
• If you have selected “Dosing Aid”, the washing machine will
indicate you the recommended detergent amount for your
laundry load
after
programme start. Follow the instructions as
indicated in section OPTIONS, FUNCTIONS AND INDICATORS /
Dosing Aid.
8.
CHANGE A RUNNING PROGRAMME, IF
NEEDED
You can still change the settings while a programme is running. The
changes will be applied, provided the respective programme phase
has not finished yet.
• Press the relevant button (for example the “Spin speed” button to
change the spin speed). The value blinks for a few seconds.
• While blinking, you can adjust the setting by turning the knob. If the
value stopped blinking, press the button again.
• Press the knob to confirm the modification. If you do not confirm, the
modification is confirmed automatically – the modified setting stops
blinking
The programme will continue automatically.
To change the settings of a running programme, you can also
• Press “Start/Pause” to put the running programme on pause
• Change your settings
• Press “Start/Pause” again to continue the programme.
9.
PAUSE A RUNNING PROGRAMME AND OPEN
THE DOOR, IF NEEDED
• Press and hold “
Start/Pause
” to pause a programme which is
running.
• Provided water level is not too high, or laundry is not too
hot, the door indicator lights up. You can open the door, for
example to add/remove laundry.
• Close the door again and press “Start/Pause” to proceed
with the programme.
10.
R RESET A RUNNING PROGRAMME, IF
NEEDED
• Press and hold the “
On/Off”
button until the display indicates
that the programme is cancelled.
The water drains, the programme ends and the door
unlocks.
11.
SWITCH OFF THE WASHING MACHINE
AFTER PROGRAMME END
• The display indicates that the cycle is finished, and the “
Door
open
” indicator lights up – you can take out your laundry
• Press “
On/Off
” to switch off the washing machine. If you do
not switch it off, the washing machine will switch off
automatically after about a quarter of an hour after programme end,
to save energy.
• Leave the door ajar, so that the inside of the washing machine can
dry.
