8
HOW TO RECEIVE THE INSTRUCTIONS FOR USE
> Phone the After-Sales Service
> Use this QR Code
> Download the guide from the Whirlpool website
http://docs.whirlpool.eu
To do this, you need to enter the correct commercial code of the
product indicated on the adhesive label.
MAINTENANCE AND TROUBLESHOOTING GUIDE
See the
Instructions for use
for instructions on maintenance
procedures and troubleshooting problems.
TECHNICAL DOSSIER
The technical dossier containing energy consumption figures may be
downloaded from the Whirlpool website
http://docs.whirlpool.eu
CONTACTING THE AFTER-SALES SERVICE
When contacting the After-Sales Service, you will need to be able to
provide the codes indicated on the adhesive label on the inner side
of the door. The telephone number is indicated in the warranty
booklet.
Whirlpool® is a registered trademark of Whirlpool, USA.
WWW
n
001
Whirlpool Europe s.r.l.
Viale G.Borghi 27
21025 Comerio - Italy
the “Normal rinse” rinse type.
If the current adjustment can be neither set nor changed, the
display will show “No Selection” or “No Change”.
RAPID
If you select this option , the wash duration will be reduced by
up to 50% depending on the selected cycle, thereby
guaranteeing simultaneos water and energy saving. Use this
cycle for lightly soiled garments.
DELAY TIMER
To set the selected programme to start at a later time, press the
button to set the desired delay time. To cancel the delayed
start, press the button again until the value “-- h” is shown on
the display.
h.
LOCK BUTTON
to lock the control panel, press and hold the button
for
approximately 2 seconds. When the display visualises “KEY
LOCK ON” the control panel is locked (with the exception of
the
button). This prevents unintentional changes to
programmes, especially with children near the machine.
To unlock the control panel, press and hold the button
for approximately 2 seconds.
1 1 2 1 5 2 3 6
Printed in Italy
