4-9
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range.
Replace all panels before operating range.
Failure to do so can result in death or electri-
cal shock.
REMOVING THE BROIL & BAKE BURNERS & IGNITORS
1.
Turn off the gas to the range and discon-
nect the power cord from the wall outlet.
2.
Open the oven door and remove the racks
from inside the oven.
3.
To remove the broil burner & ignitor:
a) Remove the front and rear screws from
the burner.
CAUTION:
When you work on the gas range,
be careful when handling the sheet metal parts.
Sharp edges may be present, and you can cut
yourself if you are not careful.
WARNING
FIRE HAZARD
Shut off gas supply line valve before servic-
ing the range.
Check all gas line connections and replace
all panels before operating the range.
Failure to do so could result in explosion, fire,
or other injury.
b) Loosen the screw slightly and rotate
the bracket on the rear of the oven liner
to the left away from the broil ignitor
insulator.
c) Pull the broil burner forward just far
enough to disconnect the wire from the
broil burner ignitor, and remove the
burner assembly.
d) Remove the two screws from the broil
burner ignitor bracket and remove the
ignitor.
Front Screw
Broil Burner
Rear Screw
Broil Ignitor
Rotate
Bracket Screw
Ignitor Insulator
Ignitor Bracket
Continued on the next page.
