USING THE IRON
1.
Lower the board to the ironing position.
2.
Plug the iron cord into the grounded re-
ceptacle.
3.
Rotate the timer knob clockwise to turn the
power to the iron on, and set the timer for
an approximate work time (5 to 50 min-
utes).
4.
When ironing is completed, turn the timer
knob to the “0” position.
5.
Place the iron in the hot iron storage
compartment in its upright position with
the bottom facing the metal heat shield.
STORING THE IRONING BOARD
1.
If you swiveled the ironing board, return
it to the straight position.
2.
Lift the front of the ironing board and return
it to the upright position.
NOTE: When moving the ironing board to the
upright position, the board will depress the
electrical circuit cutoff switch. At that time, the
indicator light and work light will go out, and
power to the AC receptacle will be shut off.
3-2
Timer
Ironing Board
Cutoff Switch
AC Receptacle
Summary of Contents for ImPress LFB2611L
