30
Troubleshooting
Before calling to Service, prove the solutions here suggested.
Problem
Check over
Solution
Nothing works
If wiring is properly connected and polarized energy supply
Connect to a properly grounded
Has blown a fuse in the house or tripped circuit breaker
Replace fuse or reconnect the circuit
If there is gas in your home, check if other gas appliances
that use work
Call your gas supplier
If the stove is properly connected to the gas supply
See the operating instructions or contact an
expert.
Burners do not work
If there is gas in your home, check if other gas appliances
that use work
Call your gas supplier
If clogged burner orifice
Remove the burners and See the operating
instructions of burners.
Burner flames are
uneven, yellow and / or
noisy
If you are properly positioned the burner caps
Check burner operation section.
Type of gas being used at home (LP Gas).
If not using LP gas, the conversion must be made,
contact an authorized service technician.
The burner makes
popping
That is not the burner wet or cap.
Let it dry
The spark plug does not
trigger
The heater is connected to a power source
Connect to properly grounded power
There sparking and will not turn
Call an authorized service
Excessive heat around
cookware on cooktop
The size of the cooking utensil
Check the location and size of pan.
The oven does not work
or does not light
Cooking time and temperature selected
See recipe and preheat schedule.
Type of gas being used at home (LP Gas).
If not using LP gas, the conversion must be made,
contact an authorized service technician.
The heater is connected to a power source
Connect to a properly grounded
The activation of the knob
See the operation section of oven
The oven burner flames
are uneven, yellow and /
or noisy
Type of gas being used at home (LP Gas).
If not using LP gas, the conversion must be made,
contact an authorized service technician.
The oven temperature is
too high or too low
The calibration setting oven temperature
See the section "Adjusting oven burner flame."
09-May-2014 18:21:12 EDT | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
