10
AU
Depending on the selected function, it could be needed to stir / turn food during cooking. In these cases the oven
will pause cooking and it will ask you to perform the needed action.
When required, you should:
q
Open the door.
w
Stir /Turn the food (depending on the required action).
e
Close the door and restart by pressing the Jet Start button.
Note: if the door is not opened within 2 minutes since the request to Stir or Turn the food, the oven will continue
the cooking process (in this case the final results may not be the optimal ones).
ADD / STIR / TURN FOOD
START PROTECTION / CHILD LOCK
This automatic safety function is activated one minute after the oven has returned to “Stand-by mode”.
When the safety function is active the door must be opened and closed in order to start the cooking,
otherwise the display will show “door”.
PAUSE OR STOP COOKING
To pause cooking:
The cooking can be paused to check, turn or stir the food by opening the door. The setting will be maintained
for 5 minutes.
To continue cooking:
Close the door and press the Jet Start button ONCE. The cooking is resumed from where it was paused.
If you don’t want to continue cooking you can:
Remove the food, close the door and press the Stop button.
When the cooking is finished:
The display will show the text “End”. An acoustic beep will signal once a minute for 10 minutes, this is normal
behaviour intended for cooling the product.
Depending on the product, the cooling fan or the internal lamp may continue to operate.
If desired, simply press the STOP button or open the door to cancel the signal and stop the cooling time. Please note that
reducing or stopping this programmed cooling cycle will not have a negative impact on the functioning of the product.
Note: The oven will only hold the settings for 60 seconds if the door is opened and then closed after the cooking
is finished.
i
STAND-BY MODE
The oven is in Stand-by mode when the clock is displayed (or, if the clock has not been set, when the display
will show “:”).
DOOR
