GB21
INSERTING WIRE SHELVES AND OTHER ACCESSORIES IN THE OVEN
The wire shelf and other accessories are provided with a locking mechanism to prevent their unintentional
removal.
1.
Insert the wire shelf horizontally, with the raised part “A” upwards (Fig. 1).
2.
Angle the wire shelf when it reaches the locking position “B” (Fig. 2).
3.
Return the wire shelf to the horizontal position and push it in fully to “C” (Fig. 3).
4.
To remove the wire shelf proceed in reverse order.
The other accessories, like the drip tray and baking tray, are inserted in exactly the same way. The
protrusion on the flat surface enables the accessories to lock in place.
CONTROL PANEL DESCRIPTION
1.
FUNCTION SELECTOR KNOB:
On/off and function selector knob
2.
THERMOSTAT KNOB:
selecting the temperature
3.
CONTROL KNOB FOR FRONT LEFT HOTPLATE
0
1 ... 10
*
4.
CONTROL KNOB FOR REAR LEFT HOTPLATE
0
1 ... 10
*
5.
CONTROL KNOB FOR REAR RIGHT HOTPLATE
0
1 ... 10
*
6.
CONTROL KNOB FOR FRONT RIGHT HOTPLATE
0
1 ... 10
*
N.B.: the knobs are retractable. Press the knobs in the middle and they pop up.
7.
ELECTRONIC PROGRAMMER
8.
THERMOSTAT LED
*
The multizone function can only be switched on for the double and triple hotplates of the cooktop.
(See cooktop functions table).
OVEN OPERATION
•
Turn the selector knob to the required function.
The oven light switches on.
•
Turn the thermostat knob clockwise to the required temperature.
The thermostat led lights up, switching off again when the oven reaches the selected temperature.
At the end of cooking, turn the knobs to “
0
”.
Fig. 1
Fig. 2 Fig. 3
3
5
6
8
4
1
7
2
Summary of Contents for PCCI 502161
Page 2: ......
Page 62: ...NL60 ...
Page 63: ......
Page 64: ...FR NL DE GB Printed in Italy 09 2011 5019 610 01260 ...
