8
Complete Installation
1. Place window-lock bracket on top of lower window and
against upper window sash.
2. Use
¹⁄₈
" drill bit to drill a starter hole through the hole in the
bracket.
3. Attach window-lock bracket to window sash with
³⁄₄
" screw to
secure window in place.
4. Insert foam seal behind the top of the lower window sash and
against the glass of the upper window.
5. Plug into a grounded 3 prong outlet.
6. Press RESET on the power supply cord. See “Electrical
Requirements.”
PORTABLE AIR CONDITIONER USE
Operating your portable air conditioner properly helps you to
obtain the best possible results.
This section explains proper portable air conditioner operation.
IMPORTANT:
■
The air conditioner display shows the current room
temperature and 24-hour clock.
■
When changing modes while the air conditioner is operating,
the compressor will stop for 3 to 5 minutes before restarting.
If a button is pressed during this time, the compressor will not
restart for another 3 to 5 minutes.
■
In Cooling or Dry mode, the compressor and condenser fan
will stop when the room temperature reaches the set
temperature.
NOTE: In the event of a power failure, your air conditioner will
operate at the previous settings when the power is restored.
Starting Your Portable Air Conditioner
A. Upper window sash
B. Window-lock bracket
A. Top of lower window sash
B. Foam seal
A
B
A
B
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
Summary of Contents for PORTABLE AIR CONDITIONER
Page 17: ...17 Notes ...
