3
AIR CONDITIONER SAFETY
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools Needed
Through-the-Wall Installation:
In addition to the tools listed above, the following tools are
needed for through-the-wall installation.
Parts Supplied
Check that all parts are included in parts package.
NOTE: Installation parts are supplied for double-hung windows
up to 43" (109.2 cm) wide.
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
To reduce the risk of fire, electrical shock or injury when using your air conditioner, follow these basic precautions:
SAVE THESE INSTRUCTIONS
Unplug air conditioner before servicing.
Use two or more people to move and install air conditioner.
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
■
Phillips screwdriver
■
Level
■
¹⁄₄
" wrench
■
Tape measure
■
Cordless drill and
¹⁄₈
" or
smaller bit
■
Pencil
■
Scissors
■
Saw
■
Wood preservative
■
Caulk
■
1" (2.5 cm) or thicker
lumber
■
1
" wood screws (7)
A. Foam seal
B. Side curtains (2)
C. 1
¹⁄₂
" X
¹⁄₄
" bolts (4)
D.
¹⁄₄
" nuts (4)
E.
¹⁄₄
" screws (23)
F.
³⁄₄
" screws (10)
G. Gaskets (10)
H. Lock washers (4)
I. Mounting brackets (2)
J. Angle brackets (2)
K. End caps and leveling
legs (2)
L. Adhesive seal
M. Top channel
N. Top channel seal
O. Side curtain
clamp (2)
A
O
C
G
F
D E
M
B
L
I
J
K
H
N
