AIRFLOW DIRECTION CONTROL
5. Airflow direction control
Horizontal airflow is automatically adjusted to a
certain angle in accordance with the operation
mode after turning on the appliance. The direction
of airflow can be also adjusted to your own
requirement by pressing the Swing button of the
remote control.
Horizontal airflow control (using the remote
control)
Each time the
Swing
button is pressed, horizontal
airflow is changed in sequence:
When the horizontal adjustment louver starts to
swing up and down, if this button is pressed, the
louver will stop at current position. When the
status is switched from off to
, if this button is
pressed again 2 seconds later, status will switch to
off status directly; if this button is pressed again
within 2 seconds, the change of swing status will
follow the sequence stated above.
Press SWING button continuously for more than
2s, the main unit will swing back and forth from up
to down, and then loosen the button, the unit will
stop swinging and present position of louver will
be kept immediately.
Vertical airflow control (with hands)
Turn the control rods of the vertical adjustment
louvers to change vertical air flow as shown.
Note:
The shape of the appliance may look
different from that of the air conditioner you have
selected.
A
- Do not turn the horizontal adjustment louvers
manually, otherwise malfunction may occur. If
that happens, turn off the appliance first and
cut off the power supply, then restore power
supply again.
B
- It is better not to let the horizontal adjustment
louver tilt downward for a long time at
COOLING or DRY mode to prevent
condensed water from dripping.
control rod of vertical
adjustment louvers
Appearance may vary
depending on the model you select
9
Summary of Contents for SC009
Page 2: ......
