AUTO CLEAN function
• Pressing this button in COOL or DRY mode, the
icon
is displayed and the AUTO CLEAN
function is set. After turning off the appliance,
the indoor fan will keep running for
10
minutes
to eliminate moisture in indoor unit. In this
period, you can press this button to stop indoor
fan directly.
• Pressing this button again cancels AUTO CLEAN
function, indoor unit fan will be off directly after
turning off the appliance.
Note:
AUTO CLEAN fucntion is not available in
6th SENSE,FAN only mode.
INFO °C function
By pressing this button, you can select to display
the set temperature or room temperature on front
panel.
When the appliance is powered on for the first
time,
will be displayed on remote control and
the set temperature will be displayed on control
panel.
Pressing this button twice, the icon on remote
control will be changed to
, and the indoor
room temperature will be displayed on control
panel. It will go back to set temperature after 5
seconds or once receiving other operation signal.
Note:
only set temperature is displayed on
remote control.
POWER SAVE mode
POWER SAVE
mode can only be available in
COOLING
operation mode.
When pressing this button, "SE" will display on
front panel and remote control. The appliance will
automatically adjust the set temperature according
to the actual room temperature to let the room
temperature reach a comfortable temperature
zone (24°C ~ 28°C) as quickly as possible.
This mode consumes less energy but still gives you
the comfortable cool.
Change mode or press the power save button
again to cancel this function.
*Note:
Fan speed and temperature can not be
adjusted under this mode.
12
Summary of Contents for SC009
Page 2: ......
