background image

MAINTENANCE

Clean front panel of Indoor Unit
1. Disconnect from the power supply

Turn off the appliance first before disconnecting
from power supply.

2. Open the front panel

Open the front panel as shown by the arrow
(Fig. A).

3. Clean the front panel

Wipe it with a soft and dry cloth. Use lukewarm
water (below 40°C) to clean if the appliance is
very dirty. After cleaning let it dry.

4. Close the front panel.

Close the front panel by pushing it downward.

Note:
• Do not use substances such as gasoline or

polishing powder to clean the appliance.

• Do not sprinkle water onto the indoor unit

Dangerous! Electric shock!

Clean Air filter

It is necessary to clean the air filter after using it
for about 100 hours.Clean the air filter every two
weeks if the air conditioner operates in an
extremely dusty environment.

1. Disconnect from the power supply

Turn off the appliance first before disconnecting
from power supply.

2.Take out air filter (Fig. B).

1. Open the front panel.
2. Press the handle of the filter gently.
3. Slide out the filter.

3.Cleaning the air filter (Fig. C)

If the filter is very dirty, clean it with a solution
of lukewarm water and neutral detergent.
After cleaning let it dry.

4. Refit the filter and close the front panel.
Note:
• To avoid injury, do not touch the fins of

indoor unit with your fingers after
removing the filter.

• Do not attempt to clean the inside of the

air conditioner by yourself.

• Do not clean the filter in washing machine.

Fig. A

Fig. B

Fig. C

15

Summary of Contents for SC009




























Reviews: