6. Operation
•
To turn on the air jets and the LED spotlight, simply press the button on the
edge of the bath.
•
To turn off the functions, press the button again.
7. Cleaning and maintenance
1. Use generic liquid detergent and a soft cloth for daily cleaning. Do not use
detergent with acetone, ammonia or strong water.
2. Scale deposits can be cleaned with citric acid or hot vinegar using a soft cloth.
3. Chrome parts do not need to be cleaned frequently.
4. To avoid scratches, do not clean the bath with hard or rough materials.
5. To avoid damage, do not use detergents with chemical solvents.
6. Be sure to drain the water after use.
7. To avoid damage, do not hit the bath with hard or sharp objects.
8. Do not approach the bath with cigarettes or heat sources higher than 70°C.
9. In order to clean the internal air ducts, it is recommended to activate the air pump
for about 10 seconds after each use of the bath without water.
