3-8
START
The START control will start any function.
If non-sensor cooking is interrupted, touching
the START control pad will resume the preset
cycle.
For added convenience, the “Start” touch pad
is also available on some display screens,
and provides the same function as the START
control pad.
CANCEL
The CANCEL control stops all functions except
for the Timer and Learning Mode, and cancels
programming in progress.
The oven will also turn off when the door is
opened. Close the door and touch START
control or “Continue” on the touch screen to
resume the cycle. A sensor cooking cycle may
not be resumed if interrupted by opening the
door.
CLEAR
During programming the CLEAR control
changes the numeric programming values,
such as minutes, seconds and cook power
that are active in the display to their default
value. For example, while entering a cook time,
touching CLEAR will change the time you have
already entered to “0:00.” The CLEAR control
gives an invalid signal (see “Tones” section) if
touched during cooking.
TIMER
The Timer can be set in minutes and seconds,
up to 99 minutes, 59 seconds, and counts down
the set time.
NOTE:
The Timer does not start or stop the
oven.
The Timer countdown can be seen in full screen
or in minimized view. In minimized view, the
countdown is always visible.
A. Minimized Timer countdown
A
Kids Menu
Cook Method
Food Type
Most Used
Settings & Info
Time / Temp /
Power
While the Timer is in use, the oven can still
operate. During an oven operation, the Timer
countdown will be minimized. If the Timer ends
while oven is still operating, the end-of-Timer
tones will sound, and the set operating mode
will remain active on the screen.
To Set Timer:
1. Touch TIMER control.
2. Using the “+” and “-” controls or the number
pads, enter desired time in minutes and
seconds, and then touch “Start Timer.”
The countdown will be in full screen
view.
3. Touch “OK” to minimize the countdown.
To see the countdown in full screen view, touch
the minimized Timer countdown pad on the
touch screen, or TIMER control.
The time can be reset during the countdown
by touching TIMER, entering a new time, then
touching “OK,” or the START control.
To Cancel:
Touch TIMER control, then touch
“Cancel Timer.”
Summary of Contents for SPEEDCOOK GH6208 XR
