12
MODE AND FUNCTION DESCRIPTIONS
6th SENSE MODE
Press the
button, the unit enters
6th sense
mode directly regardless of the unit is on or off.
In this mode, temperature and fan speed are
automatically set based on the actual room
temperature.
Operation mode and temperature are
determined by indoor temperature.
Heat pump models
Button is ineffective in Jet mode.
Note:
Temperature, airflow and direction are
controlled automatically in 6th sense mode.
However, a decrease or rise of up to 2°C can be
set with the remote control if you still feel
uncomfortable.
What you can do in 6th sense mode
Indoor
temperature
Operation
mode
Target
temperature
21°C or below
HEATING
22°C
21°C-23°C
FAN ONLY
23°C-26°C
DRY
Room
temperature
decrease 2°C
after operating
for 3 minutes
Over 26°C
COOLING
26°C
Your feeling
button
adjustment procedure
Uncomfortable because of unsuitable
air flow volume.
Indoor fan speed alternates among High, Medium
and Low each time this button is pressed.
Uncomfortable because of unsuitable
flow direction.
Press it once, horizontal adjustment louver swings
to change horizontal airflow direction. Press it
again, swings stops. For vertical airflow direction
please refer to the chapter "Airflow direction
control".
