background image

3

REFRIGERATOR

 

SAFETY

Proper Disposal of Your 

Old Refrigerator

IMPORTANT: Child entrapment and suffocation are not problems 
of the past. Junked or abandoned refrigerators are still dangerous 
– even if they will sit for “just a few days.” If you are getting rid of 
your old refrigerator, please follow these instructions to help 
prevent accidents.

Before you throw away your old refrigerator or freezer:

Take off the doors.

Leave the shelves in place so that children may not easily 
climb inside.

You can be killed or seriously injured if you don't
immediately follow instructions.

You can be killed or seriously injured if you don't
follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or
“WARNING.” These words mean:

IMPORTANT SAFETY INSTRUCTIONS

WARNING: 

 To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic 

precautions:

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Disconnect power before servicing.

Replace all panels before operating.

Remove doors from your old refrigerator.

Use nonflammable cleaner.

Keep flammable materials and vapors, such as 
gasoline, away from refrigerator.

Use two or more people to move and install 
refrigerator.

Disconnect power before installing ice maker (on 
ice maker kit ready models only).

Use a sturdy glass when dispensing ice or water 
(on some models).

SAVE THESE INSTRUCTIONS

WARNING

Suffocation Hazard

Remove doors from your old refrigerator.

Failure to do so can result in death or
brain damage.

Summary of Contents for ST14CKXHW00





















Reviews: