1
8
Location to install the indoor unit
Places where there are no obstacles near the exit and it can easily reach all
corners.
Places where pipes can be installed, and wall holes can be easily made.
Observe the necessary distance between the ceiling and the wall, according to
the wiring diagram.
Places in which the air filter can be removed easily.
Keep the unit and remote control within 1 m or more from the television, radio,
etc.
Do not place objects near the air inlet that can obstruct it.
A place that supports the weight and that does not increase the noises and
vibrations caused by the operation.
Location for installation of the outdoor unit
Perform the installation in a suitable and well-ventilated place, avoid doing it in places
where there may be flammable gas leaks.
Keep the necessary distance from the wall.
Do not install the outdoor unit in a dirty place with grease stains, near a vulcanized
gas outlet nor in coastal areas with high salinity.
Avoid installing the unit next to a road, where you might receive splashes of dirty
water.
Use a fixed base that does not increase the noise of the unit. The use of synthetic
rubber on the bases of the outdoor unit is recommended.
Avoid obstructing the air outlet.
Install it where the air discharge and the noise does not disturb the neighbors.
Exterior unit
The maximum
pipe distance is
15 meters
The maximum
distance
without using a
pipe extension
is 4 meters
Interior unit
Exterior unit
The maximum
pipe distance is
15 meters
The maximum
distance without
using a pipe
extension is 4
meters
Model
S
WA
1
0
40
Q
4
15
4
20
S
WA
2
0
40
Q
4
15
4
20
S
WA
3020
Q
4
15
4
20
S
WA
4020
Q
4
15
4
20
Pipe length at
packaging (m)
Allowed pipe
limit (m)
Elevation difference
limit (m)
Additional coolant
gas required (g/m)
S
WA
312
0
Q
4
15
4
20
S
WA
412
0
Q
4
15
4
20
S
WA
3
2
20
Q
4
15
4
3
0
S
WA
4
2
20
Q
4
15
4
3
0
Summary of Contents for SWA1040Q
Page 17: ...17 INSTRUCCIONES DE INSTALACIÓN ...
Page 23: ... ...
