27
L
IFT
-
UP
COOKTOP
AND
SURFACE
BURNERS
2.
Lift the front of cooktop at both front corners
until the support rods
lock into place.
NOTE:
Do not drop the
cooktop. Damage could
result to the porcelain
and the cooktop frame.
3.
Wipe
the surface under the cooktop with warm,
soapy water and a
sponge. Use
a soap-
filled plastic scrubbing
pad on heavily soiled
areas.
1.
Remove the surface burner grates.
4.
Wipe off the surface burners with warm, soapy
water and a sponge after
each use. To remove
cooked-on food, soak
the burners in a vinegar
and water solution for
20-30 minutes. Then
scrub
them with a
plastic scrubbing pad.
(See “Cleaning chart”
earlier in this section for
more information.)
1
2
"
w
WARNING
Carbon Monoxide Poisoning Hazard
Do not operate with a yellow flame.
Doing so can result in death, heart attack,
or convulsions.
5.
Check the burner flames once in a while for proper
size and shape as shown.
A good flame is blue in
color. If flames lift away
from ports, are yellow,
or are noisy, turn off the
burner. Allow the burner
to cool and follow Step 6.
If you still have a problem,
contact an authorized
service technician to
check the air/gas mixture
or see the Installation Instructions.
6.
If the ports are clogged, clean with a straight
pin. DO NOT enlarge
or distort the ports.
DO NOT use a tooth-
pick to clean the ports.
Toothpick pieces may
clog the ports.
Ports
continued on next page
CARING FOR YOUR RANGE
Summary of Contents for TGS325E W
Page 33: ...33 NOTES ...
Page 34: ...34 NOTES ...