24
• Electrical brush cleaning
(1) Use the screw driver to rotate the locking button as
picture showing, from position to .
(2) Remove the cover, take the roller out and clean it.
(It can’t be cleaned in water.)
(3) Assemble the roller and cover after cleaning.
(2) Hold the dust cup as shown in the right picture, so
the dust will not drop onto the floor.
(3) Turn the cyclone cover as shown in the right picture,
and clean the cyclone cone.
(4) Take out the HEPA filter, and clean it. You can rinse
the HEPA filter in lukewarm water & dry it
completely.
(5) Assemble the HEPA filter after cleaning.
Dust cup
Filter assembly
HEPA
filter
Cyclone cone
Cyclone cover
Cleaning and airing
Locking button
for the cover
Cover
Roller
Summary of Contents for VS1405
