10
1. Insert the handheld unit to the upright unit
Make sure the upright unit is switched OFF. Avoid
any obstacles in between the hand-held unit and
the upright unit.
2. Attach the upright unit onto the charging bracket
˙
Make sure the charging bracket is placed on a flat stable floor.
˙
Attached the upright unit onto the charging bracket.
˙
If the upright unit is not attached to the charging
bracket properly, charging will not start.
˙
Avoid any dust in between the charging bracket
and the unit, clean the contacts if necessary.
˙
Be careful of the unit will be tripped
over by the power cable during charging.
˙
The charging indicator will illuminate red to
indicate that the vacuum cleaner is being charged.
NOTE: The charging indicator will turns to blue
when the battery is fully charged.
HINT: It is recommended to charge the vacuum
cleaner for at least 6 hours for before use.
˙
It is normal that the charging bracket and the unit
will get warm while charging.
˙
Even if the switch button is turned on, put the
vacuum cleaner back into the charging bracket,
the vacuum cleaner will be automatically stop working.
˙
During the battery recharge process on charging bracket, the vacuum
cleaner has the circuitry protect feature. Even press on the switch
button, the product will be still in power-off mode.
3. Connect the power cable to the main socket
Socket for
Adaptor
Charge the battery when:
˙
using the product for the first time
˙
after not using the product for a long period of time
˙
when the unit is at low power and the battery/ charging indicator flashes red.
Light
on
Charging the Vacuum Cleaner
PRODUCT CHARGING
Summary of Contents for VS1809
Page 1: ...產品安全指引及使用說明指南 VS1809 ...
Page 23: ...23 電量 充電指示燈 狀態 LED 顏色 電源開啟 藍色 電量低 藍光閃爍 電量耗盡 紅光閃爍 充電中 紅色 充電完畢 藍色 電池故障 紅光與藍光交錯閃爍 產品充電 ...
Page 29: ......
Page 30: ......
