background image

Use & Care guide

EN

10

Troubleshooting

What to do if...

Possible reasons

Solutions

The appliance is not working.

There may be an appliance power

supply problem.

Check if power cable plugged into a live

socket with the proper voltage.

Check if the protection devices and fuses

of the electrical system in your home

There is water in the defrost pan. This is normal in hot, damp weather.

The pan can even be half full.

Make sure the appliance is level so that

the water does not overflow.

The edges of the appliance

cabinet, which come in contact

with the door seal, are warm to

the touch.

This is not a defect. This is normal in hot

weather and when the compressor is

running.

The light does not work.

The light may need replacing.

The appliance may be in On/ Stand-by

model.

Make sure if the protection devices and

fuses of the electrical system in your

home work well.

Check if the power cable is plugged into a

live socket with the proper voltage

In case the LEDs are broken the user

must call the Service for exchange of the

same type available only at our Aftersales

Service Centers or authorized dealers.

The motor seems to run too

much.

Motor running time depends on

different things: number of door

openings, amount of food stored,

temperature of the room, setting of the

temperature controls.

Make sure that the appliance controls are

correctly set.

Check if there is not a large amount of

food been added to the appliance.

Check that the door is not opened too

often.

Check that the door close properly.

The appliance temperature is

too high.

There could be various causes (see

“Solutions”).

Make sure that the condenser (back the

appliance) is free of dust and fluff.

Make sure that the door properly closed.

Make sure that the door seals properly

fitted.

On hot days or if the room is warm, the

motor naturally runs longer.

If the appliance door has been left open

for a while or if large amounts of food

have been stored, the motor will run

longer in order to cool down the interior

of the appliance.

The doors do not open and close

properly.

There could be various causes (see

“Solutions”).

Check that food packages are not

blocking the door.

Check that the internal parts or automatic

ice maker are not out of position.

Check that the door seals are not dirty or

sticky.

Ensure the appliance is level.

Summary of Contents for W7 931A OX














Reviews: