background image

Assistance or Service

Before calling for assistance or service, please check “Troubleshooting” or visit  www.whirlpool.com/help. 

It may save you the cost of a service call. If you still need help, follow the instructions below. 

When calling, please know the purchase date and the complete model and serial number of your appliance.  

This information will help us to better respond to your request.

Whirlpool Corporation 

Customer eXperience Center 

553 Benson Road 

Benton Harbor, MI 49022-2692

Customer eXperience Centre 

Whirlpool Canada LP 

Unit 200-6750 Century Ave 

Mississauga, Ontario L5N 0B7

You can write with any questions or concerns at:

Whirlpool Corporation Customer eXperience Center 

1-800-253-1301    www.whirlpool.com

1-800-442-9991 

(Accessories)

 

www.whirlpool.com/accessories

Whirlpool Canada LP  

Customer eXperience Centre 

1-800-807-6777 

www.whirlpool.ca

Our consultants provide assistance with

Please include a daytime phone number in your correspondence.

If you need replacement parts or to order accessories

We recommend that you use only FSP

®

 Factory Specified Parts.  

These parts will fit right and work right because they are made with the same precision  

used to build every new WHIRLPOOL

®

 appliance. 

To locate FSP

®

 replacement parts, assistance in your area, or accessories: 

or call your nearest designated service center or refer to your Yellow Pages telephone directory.

In the U.S.A.

 

Features and specifications on our full line of appliances.

 

Installation information.

 

Specialized customer assistance (Spanish speaking, 

hearing impaired, limited vision, etc.).

In the U.S.A. and Canada

 

Use and maintenance procedures.

 

Accessory and repair parts sales.

 

Referrals to local dealers, repair parts distributors, 

and service companies. Whirlpool designated service 

technicians are trained to fulfill the product warranty and 

provide after-warranty service, anywhere in the United 

States and Canada.

Assistance ou Service

Avant de faire un appel pour assistance ou service, veuillez vérifier la section “Dépannage” ou consulter  

www.whirlpool.com/help. Cette vérification peut vous faire économiser le coût d’une visite de réparation.  

Si vous avez encore besoin d’aide, suivre les instructions ci-dessous.

Lors d’un appel, veuillez connaître la date d’achat et les numéros au complet de modèle et de série de votre appareil.  

Ces renseignements nous aideront à mieux répondre à votre demande.

Si vous avez besoin de pièces de rechange ou pour commander des accessoires

Si vous avez besoin de commander des pièces de rechange, nous vous recommandons d’utiliser seulement  

des pièces spécifiées par l’usine FSP

®

. Ces pièces conviendront et fonctionneront bien parce qu’elles sont fabriquées  

selon les mêmes spécifications précises utilisées pour construire chaque nouvel appareil WHIRLPOOL

®

.

Pour trouver des pièces de rechange FSP

®

, de l’aide ou des accessoires dans votre région : 

Whirlpool Canada LP Centre pour l’eXpérience de la clientèle 

1-800-807-6777             www.whirlpool.ca 

ou contacter votre centre de réparation désigné le plus proche, ou encore consulter les Pages Jaunes.

Pour plus d’assistance

Vous pouvez nous soumettre toute question ou  

problème en écrivant à l’adresse ci-dessous :

Centre pour l’eXpérience de la clientèle 

Whirlpool Canada LP 

Unit 200-6750 Century Ave 

Mississauga, Ontario L5N 0B7

Dans votre correspondance, veuillez  

indiquer un numéro de téléphone où on  

peut vous joindre dans la journée.

Nos consultants fournissent  

l’assistance pour :

 

Procédés d’utilisation et d’entretien.

 

Vente d’accessoires et de pièces de rechange.

 

Les références aux concessionnaires, compagnies 

de service de réparation et distributeurs de pièces de 

rechange locaux. Les techniciens de service désignés 

par Whirlpool sont formés pour remplir la garantie des 

produits et fournir un service après la garantie, partout  

au Canada.

              

08/14 

W10663951B

 

Printed in U.S.A.

W10663960B 

SP 

    

    

Imprimé 

aux 

États-Unis

®

/

TM

 © 2014 Whirlpool. All rights reserved. 

Used under license in Canada.

®

/

TM

 © 2014 Whirlpool. Tous droits réservés. 

Emploi sous licence au Canada.

Summary of Contents for WED72HEDW0




















Reviews: