Whirlpool WEFV08S-1A, Installation Instructions Manual

13

ELECTRIC FURNACE 

MAINTENANCE

IMPORTANT: Do not operate system without a filter. A filter is 
required to protect the coil, blower, and internal parts from 
excessive dirt and dust. 

■

Inspect air filters at least once a month and replace or clean 
as required. Dirty filters are the most common cause of 
inadequate heating or cooling performance.

■

Replace disposable filters. Cleanable filters can be cleaned 
by soaking in mild detergent and rinsing with cold water.

■

Install new/clean filters with the arrows on the side pointing in 
the direction of airflow.

■

Never replace a cleanable (high velocity) filter with a 
disposable (low velocity) filter unless return air system is 
properly sized for it.

ASSISTANCE OR SERVICE

If you need further assistance, you can write to the below 
address with any questions or concerns: 

Whirlpool

®

 Home Cooling and Heating

7901 S.W. 6th Court
Plantation, Florida  33324

Please include a daytime phone number in your correspondence.

Accessories

To order accessories ask for the appropriate part number listed 
below or contact your Whirlpool

®

 Home Cooling and Heating 

dealer.

Electric Heat Kits 

Refer to the Accessory Kit Label on the front panel of the electric 
furnace  for electric heat kit options and applications.

AEFFLTS-1

AEFFLTM492-1

AEFFLTL493-1

Filter Kit for 17.5 in. x 22.5 in. cabinets

Filter Kit for 22 in. x 21.5 in. cabinets

Filter Kit for 22 in. x 26 in. cabinets