7
3. Select a heat setting from 1 - 9 by touching/sliding on the
power slider. The heat setting will appear in the surface cooking
area display.
The power slider consists of 9 positions plus a “Boost” position.
When the user slides to 0, “0” will be displayed. The surface
cooking area will not turn on but remains active/selected.
When a surface cooking area is left at the “0” power level for
30 seconds, the zone will automatically turn off and display
only the middle dash without the indicator light.
IMPORTANT: The heat setting for an active cooking area may
be adjusted by a hand or cooking utensil above the heat level
slider even if there is no contact with the cooktop glass. A beep
will sound only if the slider moves to “0” or “Boost,” or if the
cooking area is turned off.
Use the following chart as a guide when setting heat levels.
To Turn Off:
1. Touch OFF to turn off desired surface cooking area. One tone
will sound when Off is pressed.
2. Touch POWER to turn off the cooktop when finished.
Hot Surface Indicator
An “H” will appear in the heat setting display of a surface cooking
area that is too hot to touch, even after that surface cooking area is
turned off.
If the cooktop is on when a power failure occurs, the Hot Surface
Indicator “H” will remain on up to 45 minutes after the power is
restored to the cooktop.
Simmer
The Simmer function can be used on all surface cooking areas.
To Use:
To Turn On:
1. Check that a surface cooking area has been selected.
2. Touch SIMMER. “A” will appear in the display, and the indicator
light next to Simmer will light.
The timer remains visible and can be set if desired.
To Turn Off:
Simmer can be turned off in 3 different ways:
1. Use the power slider to set to a heat level.
OR
2. Touch the surface cooking area OFF keypad.
OR
3. Select a different cooking function.
Melt and Hold
The Melt and Hold function can be used with all surface cooking
areas.
To Use
To Turn On:
1. Check that a surface cooking area has been selected.
2. Touch MELT & HOLD. “A” will appear in the display, and the
indicator light next to Melt & Hold will light.
The timer remains visible and can be set if desired.
To Turn Off:
Melt and Hold can be turned off in 3 different ways:
1. Use the power slider to set to a heat level.
OR
2. Touch the surface cooking area OFF keypad.
OR
3. Select a different cooking function.
Pan Detection
If the system cannot recognize the pan, or if the pan has been
removed from the surface cooking area, the “replace pan”
animation appears in the cooking area display as a reminder. See
the following illustration.
If the pan is not placed within 30 seconds, the zone(s) will switch Off.
If a Timer is running when a pan is removed, the countdown will
continue.
Control Lock
The Control Lock avoids unintended use of the surface cooking
areas.
If Control Lock is activated when power to the cooktop is off, the
cooktop is locked out, and the surface cooking areas cannot be
turned on by the cooktop touch controls.
If Control Lock is activated when power to the cooktop is on, all
keypads are locked out except for the Power and Off keypads.
To Lock Cooktop:
Touch and hold the LOCK keypad for 3 seconds. After 3 seconds,
a tone will sound and the indicator light above the Lock keypad will
light, indicating that the cooktop controls are in the lockout
position.
If the cooktop is in use when Control Lock is activated, cooking will
proceed as normal and any timers that have been set will continue
their countdown.
To Unlock Cooktop:
Touch and hold the LOCK keypad for 3 seconds.
SETTING
RECOMMENDED USE
9 - Boost
■
Bring liquid to a boil.
9
■
Start food cooking.
7 - 8
■
Quickly brown or sear food.
6 - 7
■
Hold a rapid boil.
5 - 6
■
Fry poultry or meat.
■
Cook soups, sauces and gravies.
4 - 5
■
Maintain a slow boil.
■
Stew or steam food.
3 - 5
■
Simmer
1 - 2
■
Keep cooked food warm.
■
Melt chocolate or butter.
Simmer
■
Maintain a slow boil
A. Heat setting display
B. Hot surface indicator “H”
B
A
