background image

18

CLEANING THE LINT SCREEN

Every load cleaning

The lint screen is located in the door opening of the dryer.  

The control panel has an indicator light “Check Lint” to 

remind you to clean the lint screen after each load. A 

screen blocked by lint can increase drying time.

To clean:
1.

  Pull the lint screen straight up. Press tab down and open 

lint screen. Roll lint off the screen with your fingers. Do 

not rinse or wash screen to remove lint. Wet lint is hard 

to remove.

2.

 Close the lint screen and push firmly back into place.

IMPORTANT:

Do not run the dryer with the lint screen loose, 

damaged, blocked, or missing. Doing so can cause 

overheating and damage to both the dryer and fabrics.

If lint falls off the screen into the dryer during removal,  

check the exhaust hood and remove the lint. See 

“Venting Requirements” in the Installation Instructions.

Clean space where lint  

screen is located, as  

needed. Using a vacuum,  

gently remove any lint that  

has accumulated outside  

of the lint screen. 

As needed cleaning

Laundry detergent and fabric softener residue can build 

up on the lint screen. This buildup can cause longer 

drying times for your clothes, or cause the dryer to stop 

before your load is completely dry. The screen is probably 

clogged if lint falls off while the screen is in the dryer.
Clean the lint screen with a nylon brush every 6 months, 

or more frequently, if it becomes clogged due to a residue 

buildup.

To wash:
1.

  Roll lint off the screen with your fingers.

2.

  Wet both sides of lint screen with hot water.

3. 

Wet a nylon brush with hot water and liquid detergent. 

Scrub lint screen with the brush to remove residue 

buildup.

4. 

Rinse screen with hot water.

5. 

Thoroughly dry lint screen with a clean towel.  

Reinstall screen in dryer.

Dryer Care

CLEANING THE DRYER LOCATION

Keep dryer area clear and free from items that would 

block the air flow for proper dryer operation. This includes 

clearing piles of laundry in front of the dryer.

CLEANING THE DRYER INTERIOR

To clean dryer drum
1.

  Use a mild hand dish detergent mixed at a low 

concentration with very warm water, and rub with  

a soft cloth.

2.

  Rinse well with a wet sponge or towel. 

3.

  Tumble a load of clean clothes or towels to dry drum 

     OR 
      Use a microfiber cloth and hot water in a spray bottle  

to clean the drum and a second microfiber towel to dry.

NOTE:

 Garments that contain unstable dyes, such as 

denim blue jeans or brightly colored cotton items, may 

discolor the rear of the dryer interior. These stains are  

not harmful to your dryer and will not stain future loads  

of clothes. Dry unstable dye items inside out to avoid 

transfer of dye.

REMOVING ACCUMULATED LINT

From Inside the Dryer Cabinet

Lint should be removed every 2 years, or more often, 

depending on dryer usage. Cleaning should be done by a 

qualified appliance servicer or ventilation system cleaner.

From the Exhaust Vent

Lint should be removed every 2 years, or more often, 

depending on dryer usage.

Summary of Contents for WGD8700EC





























Reviews: