10
To Remove Oven Racks:
Flat Racks: Pull rack out to the stop position, raise the front edge,
and then lift out.
To Replace Oven Racks:
Flat Rack: Place rack on the rack support in the oven. Tilt the
front edge up slightly, and slide rack back until it clears the stop
position. Lower front and slide back into the oven.
Rack Positions - Upper Oven
Baking
Broiling
Rack Positions - Lower Oven
Traditional Cooking
Convection Cooking
Multiple Rack Cooking
2-rack: Use rack positions 2 and 4 when baking 2 racks of pizza.
Stagger pizza so that the pizza on rack position 2 is toward the
right side of the oven and the pizza on rack position 4 is toward
the left side of the oven.
Baking Layer Cakes on 2 Racks
For best results when baking cakes on 2 racks, use rack
positions 2 and 4. Place the cakes on the racks as shown.
BAKEWARE
To cook food evenly, hot air must be able to circulate. Allow
2" (5.0 cm) of space around bakeware and oven walls. Use the
following chart as a guide.
FOOD
RACK POSITION
All foods
1
FOOD
RACK POSITION
Broiling
1
FOOD
RACK POSITION
Large roasts, turkeys
1 or 2
Yeast breads, quick breads, muffins,
tube cakes, small cuts of meat and
poultry and 2-rack baking
2
Cookies, biscuits, casseroles, muffins,
cakes, 1-rack baking
3
2-rack baking
4 and 5, or 2 and 4, or
2 and 5
1
2
3
4
5
1
2
1
2
3
4
5
FUNCTION
NUMBER OF
RACKS USED
RACK
POSITION(S)
Convection baking
1
3
Convection baking
2
2 and 4
Convection roasting
1
1 or 2
Cook function
Rack position
Convect bake
2 and 4
Bake
2 and 4
NUMBER
OF PAN(S)
POSITION ON RACK
1
Center of rack.
2
Side by side or slightly staggered.
3 or 4
Make sure that no bakeware piece is directly
over another. See illustrations for placement of
layer cakes.
Summary of Contents for WGG555S0B
Page 47: ...47 NOTES ...
