background image

You can download the Safety Instructions, User Manual by:

•  Visiting our website - 

docs.whirlpool.eu

•  Using QR Code

•  Alternatively, 

contact our After-sales Service

 (See phone number  in the warranty booklet). When 

contacting our After-sales Service, please state the codes provided on your product’s identifi cation plate.

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.

In order to receive a more complete assistance, 

please register your product on 

www.whirlpool.com.au

EN

Quick guide

Before using the appliance carefully read the Safety Instructions.

xxxxxxxxxxxx

 xxxx

Before using the appliance carefully read the Safety Instructions.

xxxxxxxxxxxx

 xxxx

PROGRAMS

Eco cotton   

kg Max*  

 

 

Standard cotton programme, suitable to dry normally wet cotton 

laundry. Most efficient programme in terms of energy consumption 

for drying cotton laundry. The values on the Energy Label are based on 

this programme.

Mixed 

 

kg 4  

 

This programme is ideal for drying cotton and synthetic fabrics 

together.

Bed linen   

Kg Max*  

 

This programme is intended for drying cotton sheets. 

Shirts  

 

kg 3 

    

 

This is a programme for Shirts made from cotton or  cotton 

blend/synthetics.

Sport 

 

kg 4  

 

For drying sports garments made of synthetics or cotton.

Duvet 

 

  

 

Programme intended to dry bulky garments, as single duvet.

Jeans 

 

kg 3  

 

For drying cotton jeans-wear and garments made of robust 

cotton, like denim, such as trousers and jackets.

Easy ironing

This cycle allows to extend the fibres of garments thus making 

ironing and folding easier. Do not use in case of garments that are 

still wet. Suitable for small loads of cotton textiles or cotton blends.  

Refresh

A short programme suitable for refreshing fibres and garments by 

means of fresh air. Do not use with garments that are still wet. It can be 

used on with any load size but is more effective with small loads. The 

cycle duration is about 20 minutes.

FIRST TIME USE

Make sure that the water tank is correctly inserted. Make sure 

that the drain hose on the back of the dryer is fixed correctly, 

either to the dryer’s water tank, or to your domestic sewage 

system.

The dryer must be installed in a room with a temperature 

ranging between 5°C and 35°C to ensure proper operation.

Before you use your dryer ensure that it has been in a upright 

position for at least 6 hours.

DAILY USE

Doing this will keep your machine working at its BEST!
Remember to empty your water tank after each drying cycle.

Remember to clean your filters after each drying cycle. (Refer 

to section Care & M

aintenance 

).

1. Open the door and load garments. Always refer to instructions 

on clothing labels and the max loads indicated in the programme 

section. Empty pockets. Make sure  garments do not get caught 

between the door and/or the door filter. 

2. Close the door.

3. Press the button On/Off.

4. Select the programme according to the laundry type.

5. Select the options, if necessary.

6. To start the cycle, press the Start/Pause button. 

7. At the end of the drying cycle, a buzzer will beep. An indicator on 

the control panel signals the end of the cycle. Pull the load out 

immediately to prevent the formation of creases on laundry

8. Turn the machine off by pressing the button On/Off, open the 

door and pull clothing out. If the machine is not switched off 

manually, after about a quarter of an hour from the cycle end, the 

appliance turns off automatically to save energy.

If this last stage is not carried out immediately, some machines 

and/or some programmes/options are equipped with Crease Care 

system. For some hours, after the end of drying,  the drum rotates 

at regular intervals to prevent the formation of creases. In case of 

power failure, it is necessary to press the button Start/Pause to 

restart the cycle.

OPENING OF THE DOOR DURING THE CYCLE

During operation, it is possible to open the door. After having 

closed it, press the button Start/Pause again to restart the dryer.

 

*MAX LOAD 9 Kg  

(Dry load)

 CARE LABEL

Always check the care labels, especially when placing garments in 

the tumble dryer for the fi rst time. Below are the most commonly 

used symbols:
   

May be tumble dried.

 

Do not tumble dry.

 

Tumble dry – high heat.

 

Tumble dry – low heat.

CONTROL PANEL  

ON/OFF button (Reset if long pressed)

Programme selection Knob

Start/Pause

Options Buttons*

Cycle end

High heat

Anti tangle (Mute if long pressed)

Dryness level

Start lelay 

Timed drying

10 

Rapid (Key lock if long pressed)

11 

Gentle

12 

Fresh care+

*Note: some models may have the wording in full instead of the icons.

INDICATORS

Dryness level:    

Iron dry -   Hanger dry -   Cupboard dry -    Extra dry 

Cycle phase:    

Drying -    Cool down -    End of cycle

 

 

Empty water tank

 

-   

Clean door filter  -  

 Clean bottom filter

Refer to troubleshooting section:  

 Failure: 

 Call after sales service  

DEMO

 Demo mode 

1

3

2

12

10

11

7

8

9

3“

3“

h

6

5

4

1

3

2

12

10

11

7

8

9

3“

3“

h

6

5

4

Summary of Contents for WHP80250

Page 1: ...E Doing this will keep your machine working at its BEST Remember to empty your water tank after each drying cycle Remember to clean your filters after each drying cycle Refer to section Care Maintenance 1 Open the door and load garments Always refer to instructions on clothing labels and the max loads indicated in the programme section Empty pockets Make sure garments do not get caught between the...

Page 2: ...ing Fresh care If garments are left inside the drum after the end of the cycle they are subject to bacterial proliferation This option allows to prevent this proliferation by controlling the temperature and the rotation of the drum This treatment has a max duration of 6 hours after the end of the programme set This option remains in memory if selected in the previous drying If this option is used ...

Page 3: ...er without having inserted the container back in place Cleaning the door filter after each cycle see Fig B Pull the filter out and clean it by removing the lint from the filter surface under running water or using a vacuum cleaner For optimal performance dry up all the filters before inserting them back in place Do not use the dryer without having reinserted the filter in place Remove the door fil...

Page 4: ...s and options to find the programme and the options most suitable for the type of load The garments are too wet Carry out a washing cycle with higher spin speed to remove as much water as possible The dryer may be overloaded Refer to the programme section to check the max load for each programme Room temperature The drying time may be longer if the room temperature falls outside the 14 30 C range ...

Reviews: