background image

7

Troubleshooting

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions) 

to possibly avoid the cost of a service call.

www.whirlpool.com

Microwave oven will not operate

Check the following:

Household fuse or circuit breaker

If a household fuse has blown or a circuit breaker has tripped, 
replace the fuse or reset the circuit breaker. If the problem 
continues, call an electrician.

Magnetron

Try to heat 1 cup (250 mL) of cold water for 2 minutes at 100% 
cooking power. If water does not heat, try the steps in the 
bullets below. If microwave oven still does not operate, call 
for service.

Door 

Firmly close door. On some models, if a packaging spacer is 
attached to inside of the door, remove it, then firmly close door.

If a message about the door appears in the display, the door 
has been closed for 5 minutes or more without the microwave 
oven being started. This occurs to avoid unintended starting of 
the microwave oven. Open and close the door, then start 
the cycle.

Control

Make sure control is set properly. Make sure Control Lock is off. 
Make sure Demo Mode is off.

Arcing in the microwave oven

Check the following:

Soil buildup

Soil buildup on cavity walls, microwave inlet cover, cooking 
rack supports, and area where the door touches the frame can 
cause arcing. See “General Cleaning” in “Microwave Oven 
Care” section.

Turntable alternates rotation directions

This is normal and depends on motor rotation at the beginning 
of the cycle.

Display shows messages

“Enter clock” with flashing digits means there has been a 
power failure. Reset the clock.

A letter followed by a number is an error indicator. Call for 
assistance.

Fan running during cooktop usage

This is normal. The microwave oven’s cooling fan, which is 
separate from the vent fan, automatically comes on during 
microwave oven operation to cool the microwave oven. It 
may also automatically come on and cycle on and off to cool 
the microwave oven’s controls while the cooktop below is 
being used.

Radio, TV or cordless phone interference

Check the following:

Proximity

Move the receiver away from the microwave oven, or adjust the 
radio or TV antenna.

Soil

Make sure the microwave oven door and sealing surfaces are 
clean.

Frequency

Some 2.4 GHz-based cordless phones and home wireless 
networks may experience static or noise while microwave 
oven is on. Use a corded phone, a different frequency 
cordless phone or avoid using these items during microwave 
oven operation.

Replacement Parts and Cleaning Supplies

Following is a list of available parts and supplies which may be purchased separately. Please refer to the cover for contact and model 
identification information.

Replacement Parts

Turntable

Turntable support and rollers

Turntable hub

Cooking rack

Rack clip

Rack support

Grease filter

Charcoal filter

Cooktop light bulb

Cavity light bulb

Cleaning Supplies

Heavy Duty Degreaser

affresh™ Kitchen Appliance Cleaner

affresh™ Stainless Steel Cleaner

affresh™ Stainless Steel Wipes

Summary of Contents for  WMH32L19AS









Reviews: