background image

FURNACE USER INSTRUCTIONS

FOR PACKAGE GAS ELECTRIC UNITS

GAS FURNACE SAFETY

Recognize this symbol as a safety precaution.

Table of Contents

GAS FURNACE SAFETY................................................................1

IMPORTANT NOTE TO THE OWNER REGARDING 
PRODUCT WARRANTY .................................................................2

UNIT LOCATION.............................................................................2

UNIT INSTALLATION .....................................................................3

AIR REQUIREMENTS.....................................................................3

THERMOSTAT ................................................................................4

PROPANE (LP) GAS INSTALLATIONS ONLY..............................4

OPERATING INSTRUCTIONS .......................................................4

Heating Start-Up ..........................................................................4
Heating Shutdown .......................................................................5
Cooling Operation ........................................................................5

SAFETY CIRCUITS.........................................................................5

Secondary Limit Control ..............................................................5

Rollout Limit Control.....................................................................6
Compressor Protection Devices ..................................................6
Short-Cycle Protector ..................................................................6
Igniter............................................................................................6
Induced Draft Blower ...................................................................6
Indoor Air Circulator Blower.........................................................6

ROUTINE MAINTENANCE.............................................................6

Annual Inspection.........................................................................6
Replacing or Cleaning the Filter...................................................7
Clean Outside Coil—Qualified Servicer Only...............................7
Condenser, Evaporator and Induced Draft Motors .....................7
Compressor..................................................................................7

SAFETY LABELS ............................................................................8

ASSISTANCE OR SERVICE ...........................................................8

WPHI-116B

Tradewinds Distributing Company

14610 Breakers Drive

Jacksonville, FL  32258

Installer: Affix this manual, 
Installation Instructions and 
Warranty adjacent to appliance.

Owner: Read and keep all 
product literature in a safe place 
for future reference.

PLACEHOLDER
FOR
BAR
CODE

If the information in these instructions is not followed
exactly, a fire or explosion may result causing property
damage, personal injury or loss of life.

— Do not store or use gasoline or other flammable vapors 

and liquids in the vicinity of this or any other appliance.

— WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.

• Do not touch any electrical switch; do not use any phone 

in your building.

• Immediately call your gas supplier from a neighbor’s 

phone. Follow the gas supplier’s instructions.

• If you cannot reach your gas supplier, call the fire 

department.

— Installation and service must be performed by a 

qualified installer, service agency or the gas supplier.

WARNING

Hazards or unsafe practices could result in property
damage, product damage, severe personal injury or death. 

Hazards or unsafe practices may result in property
damage, product damage, personal injury or death. 

WARNING

CAUTION

Should overheating occur or the gas supply fail to shut
off, turn off the manual gas shutoff valve external to the
furnace before turning off the electrical supply.

WARNING

To avoid property damage, personal injury or death, do 
not use this furnace if any part of the furnace has been 
under water. Immediately call a qualified service technician 
to inspect the furnace and to replace any part of the 
control system and any gas control having been under 
water.

WARNING

Summary of Contents for WPHI-116B









Reviews: