14
5. On the centre rail, remove the blanking plugs from the left hand side holes, to be used for mounting the
centre hinge bracket and fit them to the right hand side holes. As illustrated below.
6. Remove both the levelling feet fitted to the base at the front corners. Remove the bottom hinge
bracket, by removing the mounting screws. As illustrated below.
7. Position the lower door in the proper position. Insert the hinge pin of the bottom hinge bracket into
the bottom left hand side hole of the lower door. Position the bracket holes over the left hand side
mounting holes, fit and tighten the screws. Next, refit the levelling feet. As illustrated below.