7
Refrigerator door
1. Remove the screw cover. See Graphic 6.
2. Remove refrigerator handle assembly. Keep all parts together.
See Graphic 6.
3. Remove door hinge hole plug from refrigerator door. Move to
opposite side hinge hole. See Graphic 3.
4. Remove door handle sealing screws. Move to opposite side of
refrigerator door. See Graphic 4.
5. Remove and discard door handle hole plug, see Graphic 7.
Replace with the door handle hole plug provided in the
Reversibility Kit located in the crisper.
6. Remove door stop. Move to opposite side of refrigerator door.
See Graphic 5.
7. Position refrigerator handle on opposite side of the refrigerator
door. See Graphic 6. First, drive top two screws in handle first.
Align lower portion of handle and drive bottom screw into
handle.
8. Replace screw cover. See Graphic 6.
9. Tighten all screws. Set aside refrigerator door until bottom
hinge is installed on refrigerator.
Style 2 - Contoured
Graphics follow these instructions.
Cabinet
1. Remove
⁵⁄₁₆
" hex-head hinge screws from handle side and
move them to opposite side. See Graphic 1-1.
2. Remove cabinet hinge hole plugs from the cabinet top and
move them to opposite side hinge holes. See Graphic 1-2.
Doors
1. Remove door hinge hole plug from top of freezer door. Move
to opposite side. See Graphic 2.
2. Remove door stop from both the freezer and refrigerator
doors and move to the other side. See Graphic 3.
Replace Doors and Hinges
NOTE: Graphic may be reversed if door swing is reversed.
1. Replace the parts for the bottom hinge as shown. Tighten
screws. Replace the refrigerator door.
NOTE: Provide additional support for the doors while the
hinges are being moved. Do not depend on the door magnets
to hold the doors in place while you are working.
2. Assemble the parts for the center hinge as shown and tighten
all screws. See Center Hinge graphic. Replace the freezer
door.
3. Assemble the parts for the top hinge as shown. See Top Hinge
graphic. Do not tighten screws completely.
4. Line up the doors so that the bottom of the freezer door aligns
evenly with the top of the refrigerator door. Tighten all screws.
Final Steps
1. Check all holes to make sure that hole plugs and screws are in
place. Reinstall top hinge cover. See Top Hinge graphic.
2. Plug into a grounded 3 prong outlet.
3. Reset the controls. See “Using the Control(s).”
4. Return all removable door parts to doors and food to
refrigerator.
Door Hinge
Hole Plug
Cabinet Hinge
Hole Plug
Dome Cap
Dome Cap Washer
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
