22
DOOR REVERSIBILITY
The direction of door opening of your freezer can be
changed.
•
Make sure that the freezer is not connected to the power
supply and that it is empty.
•
Reversing the direction of door opening is a task which
requires two people.
Tools required
•
Phillips style screwdriver
•
Flat bladed screwdriver
•
8 mm and 10 mm socket or spanner.
Lay the fridge/freezer on its back in order to gain access to the
base, being careful not to tip it back by more than 45º. Rest it
on the soft foam packaging or similar material to avoid
damaging the cooling pipes at the rear of the appliance.
Remove the two screws on the rear of the fridge/freezer.
Lift the top off the fridge/freezer.
Use the 8 mm socket or spanner to remove the 2 hinge bolts.
Remove the 2 bolts from the opposite side.
Remove the bracket and plastic surround.
Remove and replace the pin in the bracket.
Refit on the opposite side of the fridge/freezer cabinet.
Remove the blanking plug from the new hinge side and refit it
on the opposite side.
33502009GB.fm Page 22 Tuesday, October 27, 2009 12:58 PM
