ETP String Component: Device Number
8
An E Desk Device Number represents the physical E Desk box’s defined
address. The E Desk software automatically sets this number when a system is
Compiled and loaded.
The Device number that a DSP block has been assigned to can be determined in
3 ways:
First Way:
1) Right click on the DSP block and select ‘
Properties
’.
2) Click on DSP 1 attributes tab and scroll down. The device that the block is assigned to
will be displayed in the ‘Allocated To Unit’ field.
*Note: Each DSP block can be assigned to a device by changing ‘Fixed In to Unit” to ‘Yes’
(this is defaulted to no).
Second Way:
1)
In the
Display tab
of the
Options
screen select “Display Device Assignment in
DSP Block info field”.
2)
This will display the device that each DSP block is assigned to on the main
screen.
Third Way:
1)
While connected an E Desk’s RS-232 port, type the string; GET 0 DEVID E
Desk will return the Device Number of the unit you are connected to.
DSP block
without Device
number
DSP block with
Device number
