Operation
Operating your control panel with the 4 Button Control:
Turning the extraction function ON or OFF:
In standby mode, press button 1 to turn on operating mode, then press button 1 or 2 to change the speed.
The hood has three speed options and a boost speed plus the off function.
To turn hood off, press button 2 repeatedly until hood returns to standby mode.
Auto off function: After 1 hour of operation without alteration, the fan motor will turn off (returned to standby)
Turning the light function ON or OFF:
Press button 3 to turn on or turn off the light independently in standby mode. Light will automatically shut off
when time elapses in timer mode.
Turning the timer function ON or OFF:
In operating mode, press button 4 to engage the timer function, then press button 1 or 2 to adjust the delay time.
The default time set is 10min and can be increased in increments of 10min up to 1 hour.
For the controller without the LCD, the LED positioned behind button 4 will periodically blink quickly to indicate the
delayed time remaining. i.e. For 30min remaining the LED will blink 3 times quickly. When the timer function is
engaged the (timer) LED positioned behind button 4 will blink slowly.
Adjusting the clock function (Control with LCD Only):
In standby mode, press button 4 for two seconds to enter time-adjust mode, press button 1 or 2 to adjust the
hour, press button 4 again, then press button 1 or 2 to adjust the minute. Time will be automatically saved as
default if not adjusted after 5 seconds.
15
BOOST
-
+
