INSTALLATION
9
INSTALLATION
8
Power Cord Connection
• Plug the small end of the power cord into the unit’s power jack.
• Plug the large end into the vehicle’s cigarette lighter socket.
Note:
Cord fits tightly into detector. When installing the cord,
expect some resistance.
Fuse Replacement
The lighter socket plug is equipped with a replaceable 2 amp,
3AG fuse located behind the silver tip. To replace the fuse,
carefully unscrew the tip of the plug.
Important:
Unscrew slowly. The tip contains a spring which
may fly out when disassembling. Insert the new fuse with the
spring and screw on the tip. With use, screw cap on plug may
loosen.
Retighten occasionally.
gt-435ximanual.qxp 1/17/2012 3:21 PM Page 11
