OPERATION
11
OPERATION
10
Power On and Self-Test
Each time your Whistler detector is turned on, an
automatic self-test seq uence confirms that the
speaker, visual displays are functional along with many
of the saved settings. To increase the volume, continue
turning the volume knob.
Memory/Beep Confirmation
All features selected (except Stay Alert and Quiet) are
retained in memory. Each time a button is pressed one beep
confirms feature “on”, two beeps confirm feature “off”.
Audio Level Adjustment
To change the audio level:
•
Move Power/Volume button back to increase audio
level.
•
Move Power/Volume button forward to decrease
audio level.
Auto Quiet Mode
Auto Quiet mode provides an alternate alert pattern
approximately 5 seconds after a radar or safety warning
system signal is detected followed by clicking. The clicking
will continue for as long as the detected signal is present and
for any new signal within 20 seconds. Auto Quiet mode does
not affect laser alerts.
• Press Quiet (before a signal is detected) to engage
Auto Quiet mode.
• Once the Auto Quiet mode is engaged, you may
cancel the audio alarm by pressing Quiet.
• Press Quiet (when the unit is not alarming) to cancel
Auto Quiet mode.
Quiet Mode
Quiet mode cancels audio during an alert and any new alert
within 20 seconds. After 20 seconds of no radar signal
detected, the audio alerts are restored.
•
Press Quiet to cancel the audio.
•
Press Quiet a second time during an alert to restore
the standard audio alert pattern.
gt-435ximanual.qxp 1/17/2012 3:21 PM Page 13
