50
To load a saved V-Scanner folder into main memory:
1.
Press
FUNC
and then
PROG
.
2.
Press the
Load
softkey.
3.
Use the 4-direction keypad to select a V-Scanner
folder.
4.
Press the
Load
softkey. The scanner will ask you
to confirm that you wish to overwrite the current
contents of main memory.
NOTE:
If you recall a configuration from a V-Scanner
storage folder and use it in main memory, any changes
you make while using the configuration will not
automatically be transferred to the configuration data
stored in the V-Scanner storage folder. You must save
your changes back to that folder location if you want
to preserve them for later use.
To erase a V-Scanner folder:
1.
Press
FUNC
and then
PROG
2.
Press the
Eras
softkey.
3.
Use the 4-direction keypad to select a V-Scanner
folder.
4.
Press the
Eras
softkey. The scanner will ask you
to confirm that you wish to erase the selected
V-Scanner folder.
V-SCANNER STORAGE
