51
Initializing Global Settings
You can reset the global radio parameters to their
factory state without losing information stored in the
scanner’s working memory. However, any changes to
the radio’ s global settings will be lost.
NOTE:
V-Scanner memory is not affected by this
operation.
To initialize Global settings:
1.
Turn off the scanner, then turn it on again.
2.
When the Welcome/Ownerscreen appears, press
0
. The scanner displays:
3.
Press
2
. The scanner displays:
4.
Press
ENT
. The scanner displays:
5.
Press any key to proceed. The scanner reboots
with default global parameters.
System Tests:
Select a Test...
Exits if no key
is pressed
Init GLOB data
To factory state
ENTER if APPROVE
CLEAR to EXIT
GLOB EEPROM area
Initialized to defaults.
Press any key.
INITIALIZING GLOBAL SETTINGS