52
Initializing to Factory Defaults
You can initialize the entire scanner to factory defaults.
This clears all programmed data and global settings.
NOTE:
You can save your working memory to a
V-Scanner folder before performing this operation.
V-Scanner memory is not affected by this procedure.
To initialize to factory defaults:
1.
Turn off the scanner, then turn it on again.
2.
When the Welcome/Ownerscreen appears, press
0
. The scanner displays:
3.
Press
1
. The scanner displays:
4.
Press
ENT
. The scanner displays:
5.
Press any key to proceed. The scanner reboots
with file system and global parameters reset to
factory defaults.
System Tests:
Select a Test...
Exits if no key
is pressed
Factory Init
Erase Memory
ENTER if APPROVE
CLEAR to EXIT
File System
Initialized to Defaults.
Press any key.
INITIALIZING FACTORY DEFAULTS