4 – Choice of accessories
1- Universal brush is used for tiled floors and carpets.
2- Turbo brush is efficacy on carpets, rugs and non flat floors.
3- Crevice nozzle is used for radiators, crevice, corners, baseboards and beween cushions.
4- Furniture nozzle is used for the furniture, blinds, books and shelves.
I N S T R U C T I O N S F O R U S E
I N S T R U C T I O N S F O R U S E
Before using appliance, pull out a sufficient length of cable and insert the plug into the power socket. A
yellow mark on the power cable shows the ideal cable length. Do not expend the cable beyond the red
mark.
1. ON/OFF Switch
Insert the power plug into the socket. Press the main ON/OFF Switch button on the vacuum body to
switch on the vacuum machine, then the machine will work at the max power.
2. Power Control Button
This vacuum machine is used a remote speed control device on the hose handle to control the power.
You can use buttons on the hose handle to switch off or adjust the suction power of the machine.
- Standby Button
This button is used to switch between standby mode and operation mode. While the machine is opera-
ting, push this button returns the machine to the standby mode. And push again to re-start the machi-
ne. ( within 10 seconds, the standby button has power memory. Namely, if you re-start the machine
within 10 seconds, the machine will work at the same power as last time.)
- Suction Power Selection Button
Use (+) or (-) button on the hose
handle to adjust the suction power of
the machine.
Note:
If the remote control function is
unworkable, please check the battery
and change the battery inside the
handle. You can also work the
vacuum machine without the remote
control function, but power is at max
power level, and you can not adjust
the power speed.
12
1
2
3
4
Notice_AT2124:Notice_kit viande 30/11/07 12:24 Page 12
