9
DESCRIPTION OF THE APPLIANCE
DESCRIPTION OF THE APPLIANCE
F I R S T U S E
F I R S T U S E
The appliance is equipped with a stone made of fire and crushed clay. To obtain a better
cooking, it is advised to harden the stone as follows:
1. Close the cover but do not forget to take off any aluminium supports, cardboards, spatulas…
2. Plug the appliance in.
3. Set temperature on position 3 during about 10 mn.
4. After 10 min, set again the thermostat on position 0, lift the cover up with the handle and
always stand on one side of the appliance to avoid burns.
During the first use, the appliance could emit some smoke and smells. This phenomenon is quite
normal and it will disappear very quickly.
During the hardening process, the stone must not be in contact with oil, water or other liquid .
1- Handles to open the cap
2- Rubber stand for a good stability
3- Thermostat
4- Run light indicator
5- Aluminium spatulas
2
3
1
4
5
notice FP 561 20/02/07 16:56 Page 9
