3. Remove the bottom hinge pin from the
right hand side and transfer it to the left.
4. Re-position the lower door onto the
bottom hinge pin and locate the middle
hinge pin into the top of the lower door.
5. Re-fit the middle hinge and bracket.
Ensure that the door is aligned
horizontally and vertically so that the
seals are closed on all sides, before
finally tightening the screws.
Re-fit the middle bracket to the right
hand side of the cabinet.
6. Remove the top hinge pin from the top hinge. Turn the hinge over and
re-fit the hinge pin.
7. Re-fit the upper door and the upper
hinge. Ensure that the door is aligned
horizontally and vertically so that the
seals are closed on all sides, before
finally tightening the upper hinge screws.
4
