!
IF YOUR APPLIANCE IS NOT WORKING PROPERLY, ASCERTAIN WHETHER YOU CAN REMEDY THE
CAUSE OF THE FAULTY FUNCTIONING OF THE APPLIANCE YOURSELF. If you cannot solve the
problem yourself, contact the nearest
refrigerator service representative by
telephone or in writing. When
making contact, necessarily indicate
the refrigerator model
1
and number
2
. You will find this data on the
product label, which is glued to the
left
wall
of
the
refrigerator
compartment, near the fruit and
vegetable trays.
TRANSPORT
!
THE MANUFACTURER WILL NOT BE RESPONSIBLE FOR ANY DAMAGE TO THE APPLIANCE THAT
RESULTS FROM NON-COMPLIANCE WITH THE INSTRUCTIONS FOR TRANSPORTATION.
•
The appliance should be transported only in the vertical position.
•
When being transported, the appliance should be protected from atmospheric conditions (rain,
snow, dampness).
•
The appliance should be firmly secured in place while being transported, to avoid slippage or any
shocks in the transport vehicle.
•
If the appliance was transported not vertically, it may be connected to the mains after 4 hours at
least. If this is not done, the appliance compressor may fail.
ENVIRONMENTAL PROTECTION INFORMATION
This symbol indicates that once the appliance is no longer needed, it cannot be disposed together
with other miscellaneous municipal waste. It should be collected and eliminated separately, i.e. in
containers specially marked with this symbol in large-dimension rubbish collection areas.
Full information on where to submit the old appliance safety can be obtained from local
government authorities, the shop where you bought the appliance, or the manufacturer’s representatives.
If you decided to scrap the appliance, make it impossible to use in order to prevent possible misadventure.
Pull out the electric plug from the electricity supply socket and then cut off the cord. Tear off the gasket.
Break the door lock if any.
WARNING! Do not dismantle the appliance yourself. Pass it on to recycling companies.
