PROGRAM
DETERGENT
COMPARTMENT
MAX DRY
LOAD
CAPACITY
(kg)
PROGRAM
TIME
(MINS)
ENERGY
CONSUMPTION
(kWh)
WATER
CONSUMPTION
(litres)
TYPE OF LAUNDRY
EXPLANATIONS
13 - RINSE
28
0,04
41
When you need an additional rinse to be done to
your clothes after the washing process, you can use
this program for all kinds of clothes.
14 - SPIN
10
0,02
-
When you need an additional spin to be done to
your clothes after the washing process, you can use
this program for all kinds of clothes.
15 - DRAIN
2
0,01
-
This program is used to drain the dirty water inside
after the washing process of your machine. If you
want the water inside your machine to be drained
before the program ends, you can use this program.
TABLE - 1 (Continued)
Note: You can use fabric softeners in all programs (except spin and drain programs) as required. Please use the quantity of
softener as recommended by the softener producer. Put the softener in the
(softener) compartment of the detergent drawer.
The Cotton 60° and Cotton 40° are the standard washing programs to which the information on the energy label and
product fiche relates. These programs are suitable to clean normally soiled cotton laundry. They are the most efficient programs in
terms of combined energy and water consumption.
If the machine is left powered up it will consume 0.68W. When the program dial is in the O (off) position the machine will consume
0.08W, until the power is switched off.
Based on test results of standard 60 ° C cotton programme at full load and partial load, and standard 40 ° C cotton programme at
partial load, remaining moisture content is (%) 62.
The actual water temperature achieved may differ from the declared program temperature.
It is recommended to use liquid detergent for low temperature washing programs.
11