background image

2

TABLE OF CONTENTS

Content

Page

Important Safe Operation Practices................................................................... 3

Assembling Your Log Splitter............................................................................. 5

Know Your Log Splitter ...................................................................................... 9

Operating Your Log Splitter................................................................................ 10

Adjusting Your Log Splitter................................................................................. 11

Maintaining Your Log Splitter ............................................................................. 12

Conditions That Will Void Warranty ................................................................... 14

Troubleshooting ................................................................................................. 14

Parts List ............................................................................................................ 16

FINDING MODEL NUMBER

This Operator’s Manual is an important part of your new log splitter. It will help you assemble, prepare and 
maintain the unit for best performance. Please read and understand what it says. 

Before you start assembling your new equipment, please locate the model plate on the 
equipment and copy the information from it in the space provided below. The information on 
the model plate is very important if you need help from our Customer Support Department or 
an authorized dealer. 

You can locate the model number by standing behind the unit and looking down at the hydraulic tank. 
A sample model plate is explained below. For future reference, please copy the model number and 
the serial number of the equipment in the space below.

CALLING CUSTOMER SUPPORT

If you have difficulty assembling this product or have any questions regarding the controls, operation or 
maintenance of this unit, please call the Customer Dealer Referral Line. 

Call 1- (800)-949-4483 to reach the Customer Dealer Referral Line. Please have your unit’s 
model number and serial number ready when you call. See previous section to locate this 
information.

Copy the model number here:

Copy the serial number here:

(Model Number)

(Serial Number)

WHITE OUTDOOR

CLEVELAND, OHIO  44136

PRODUCTS COMPANY

P.O. BOX 361131

For more details about your unit, visit our website at www.whiteoutdoor.com  

             

Summary of Contents for 24AA570H190





















Reviews: