6
INSTALLER/CONFIGURATION MENU
With thermostat in Heat, Cool or Auto, in normal operation, press the Menu button for at least 5 seconds. The display will show
item #1 in the table below. Press Menu button to advance to the next menu item. Press
or
to change an item option.
INSTALLER/CONFIGURATION MENU
MENU
REF.
HP SS
PRESS
BUTTON
DISPLAYED
(FACTORY DEFAULT)
Press
or
to
select from listed options
COMMENTS
1
1
1
MENU
Lk (OFF)
L
Selects Keypad Lockout.
(Not available on earlier models)
MENU
0
001 to 999
Selects Keypad lockout combination number
2
2
2
MENU
(MS 2)
HP 1, HP 2, SS 1
Selects Multi-Stage (MS 2 No Heat Pump),
Heat Pump 1 (HP 1, 1 compressor),
or Single Stage (SS 1), Heat Pump 2 (HP 2, 2
compressor or 2 speed compressor)
3
3
3
MENU
(GAS) for SS or MS
(ELE) for HP
ELE
GAS setting: furnace controls the blower
ELE setting: thermostat controls the blower
4
4
4
MENU
CS (0)
(Disabled)
1, 2, 3, 4, 5, 6
Selects Cool Savings
Value 1 (low) to 6 (high), Value 0 Disables Feature
5
5
5
MENU
E (On)
OFF
Selects Energy Management Recovery (EMR)
On or OFF.
6
–
6
MENU
CR Heat (ME)
SL, FA
Adjustable Anticipation:
Selects heating cycle rate for MS or SS
7
6
–
MENU
CR Heat Pump
(ME)
SL, FA
Adjustable Anticipation (Heat Pump) (only
when heat pump is selected in #1)
8
7
7
MENU
CR Cool (ME)
or
CR Emer (FA)
SL, FA
SL
Adjustable Anticipation: Selects the cycle rate for
cooling (only when MS 2 or SS 1 is selected in
item 1.) or Selects the cycle rate for Emergency
mode and Auxiliary stage if Heat Pump is
selected in item 1.
9
8
8
MENU
CL (OFF)
CL On
Compressor Lockout Time
10
9
9
MENU
Heat Auto
Cool Off
Heat Cool Off,
Heat Off with Fan icon,
Heat Off without Fan icon
Cool Off, Auto Off
System Mode Configuration
with Automatic Changeover capability
11
10 10
MENU
dL (On)
dL OFF
Selects Display Light On or OFF
12
11 11
MENU
0
(current temperature)
1 HI, 2 HI, 3 HI, 4 HI,
1 LO, 2 LO, 3 LO, 4 LO
Adjustable Ambient Temperature Display
13
12 12
MENU
°
F
°
C
Selects Fahrenheit/Celsius Temperature Display
14
13 13
MENU
L Heat
(90)
L 62 to L 89
Selects Limited HEAT Range
15
14 14
MENU
L Cool
(45)
L 46 to L 82
Selects Limited COOL Range
16
15 15
MENU
P7
P3
Defaults for 7 day programming (P7) or 5/1/1
day programming (P3) is available
17
16 16
MENU
Heat AS (On)
OFF
Automatic Schedule for heat mode.
18
17 17
MENU
Cool AS (On)
OFF
Automatic Schedule for cool mode.
19
18
–
MENU
Heat FA (On)
OFF
Fast Heat option may be disabled by
selecting OFF. NA to SS config.
20
19
–
MENU
Cool FA (On)
OFF
Fast Cool option may be disabled by
selecting OFF. NA to SS config.
NA to Heat only system.
21
20
18
MENU
CA (OFF)
On
Selects active Comfort Alert On or OFF.
Require CA II Module. (Not available on earlier
models)
22
21 19
MENU
dS (On)
OFF
Selects Automatic
d
aylight
S
avings Time option
On or OFF.
23
22 20
MENU
Change Filter (OFF)
On
Selects Filter Change-out Indicator On or OFF.
MENU
Change Filter (200 h)
25-1975 h
Change Filter time in 25 hour increments. This
menu only appears if On is selected in above.
24
23 21
MENU
Cool On (o)
Heat On (b)
Selects operation of the reversing valve terminal
(O/B) output as an O or B terminal.
25
24 22
RUN
Returns to Normal Operation
